Optional Accessories for ETX Telescopes
-
Table_Tripod_880.jpg (5260 bytes) #880 Equatorial Table Tripod
ETX-90EC and ETX-125EC models permit pushbutton tracking of astronomical objects from their standard-equipment Electronic Controllers. For fully automatic tracking a table tripod, or the # 883 Deluxe Field Tripod, may be added, allowing for polar alignment of the telescope. Each table tripod includes two fixed legs and two variable-length legs inscribed with a range of latitude settings for quick polar alignment. At observing latitude settings below 25º the optional # 1422 Low-Latitude Balance Weight (not shown) is recommended for the ETX-90EC.

 

#884 Field Tripods in Altazimith and Equatorial Orientations #884 Deluxe Field Tripod for ETX Astro Telescopes
The full-length Meade # 884 Deluxe Field Tripod accepts any ETX Astro Telescope model and provides a rigid mounting platform for virtually any observing application, astronomical or terrestrial. Suitable for either standing or seated observing, the # 884 is adjustable from 34" to 54". Micrometric controls in both azimuth (horizontal) and elevation (polar) angle permit precise polar alignment of the telescope's fork mount for astronomical applications. Elevation angle can be fixed at any observing latitude 20º to 90º. The 90º (altazimuth) orientation is desirable for terrestrial observations or for the astronomical applications of ETX-90EC and ETX-125EC models equipped with the optional Autostar Computer Controller, where fully automatic sidereal-rate tracking can be accomplished with the telescope in altazimuth mode. Each ETX Astro Telescope model attaches to the tripod in seconds with two thumbscrews. Net tripod weight is 11 Lbs.

 

RightAngleViewfinder_825.jpg (14798 bytes) #825 8x25mm Right-Angle Viewfinder
Allows for a comfortable 90º viewing position with the ETX-90EC. The # 825 viewfinder replaces standard-equipment 8x21mm viewfinder and fits into the same bracket on the telescope.
Standard-equipment on the ETX-125EC.

 

MIC-07328.jpg (12136 bytes) Hard Carrying Cases
For secure portability of ETX Astro Telescope models in the field, Meade Hard Carrying Cases are fully lined with fitted foam inserts and accept the complete ETX-90EC or ETX 125EC Astro Telescopes, plus optional accessories.

# 774 Hard Case for ETX-90EC (19"x14"x7")
# 775 Hard Case for ETX-125EC (23"x15"x11")

 

CarryCase_765.jpg (88254 bytes) #1342 Soft Carry Bag
Meade soft-padded carry bags are well-suited to travel with the ETX-90EC Astro Telescope.  Each carry bag includes a shoulder strap and permits ready transport of the complete telescope, including accessories.

 

Barlow_2X_126.jpg (15314 bytes) #126 2x Barlow Lens
An amplifying lens, the multi-coated # 126 2x Barlow
doubles the powers of all eyepieces with which it is used.
Insert the Barlow ( arrow ) into the telescope's eyepieces
holder first, followed by an eyepiece.
The # 126 is intended for astronomical applications.

 

ErectingPrism_932.jpg (39578 bytes) #932 45º Erecting Prism
All ETX models include an internal optical-flat mirror to reflect light to the telescope's 90º astronomical observing position; in this position the telescope's image is upright, but reversed.
For terrestrial observing with any model of ETX Astro Telescope the # 932 Prism results in a fully correctly oriented image and a convenient 45º observing angle.

Note: The # 932 Prism is included in ETX SPOTTING Scopes.

 

ElectricFocuser_1244.gif (16502 bytes) #1244 Electronic Focuser
Meade-engineered for smooth, rapid focusing of the image with any ETX model, each focuser includes coarse and micro fine speeds. The standard-equipment hand controller accepts one (user-supplied) 9-volt battery and focuses the ETX-90EC and ETX-125EC Astro telescopes. The focuser plugs into, and is powered by, the telescope's control panel, with operation effected through either the Electronic Controller or Autostar hand boxes.
#1244 for ETX-90EC model
#1247 for ETX-125EC model

 

Photo_Adptr_64.jpg (4642 bytes) #64 T-Adapter
The basic means of photography through any ETX Astro telescope or Spotting Scope, the # 64 T-Adapter threads to the rear cell of the telescope, followed by a T-mount appropriate to the user's brand of 35mm camera. In this way the camera body is rigidly coupled to the telescope's optical system, which in effect becomes the camera's lens.

 

DCpowerCord_607.gif (6297 bytes) # 607 Power Adapters and Cords
In addition to their internal battery packs ETX-90EC and ETX-125EC
telescopes may be powered from standard 115v AC home electricity
with the # 541 AC Adapter. The # 541 plugs into any standard home
Alternately, either telescope may be powered in the field by using # 607 Power Cord (shown), a 25ft. cord which plugs into the telescope's control panel and supplies 12v DC directly from the car battery.

 

AC Adapter (no picture) #541 AC Adapter permits powering of the ETX-90EC Via a
standard household ( 115vAC ) electrical outlet. Supplied with a 25 foot cord.
For powering ETX-90EC, ETX-125EC, DS Series, LX10, LX50, #1701 Single-Axis RA Drive System,
#1702 Dual-Axis Drive System, #1705 Declination Motor.

 

#505 Connector Cable Set


505.gif (3785 bytes) #505 Connector Cable Set connects between a PC and
Autostar for telescope computer control or download capabilities.
(1) Serial Interface Adapter; (2) 6-Foot Cable; (3) Autostar;
(4) Handbox (HBX) port on the telescope’s computer control panel.

 

505_a.gif (2538 bytes) #505 Connector Cable Set connects between two
Autostar handboxes. (1) 3-foot cable.
Use this procedure to transfer information from one Autostar
(Clone) to another Autostar (Download):

 


 

epoch2000.gif (19296 bytes) Epoch 2000sk Sky Software
281,000 objects supplied on 3.5" discs for Windows 3.1 or higher; fully compatible with windows 95.
Epoch 2000sk-CD Sky Software
19 million objects, including the complete Hubble Guide Star Catalog; supplied on CD-ROM
Epoch 2000ip Image Processing Software
Supplied on 3.5" discs for Windows 3.1 or higher; fully compatible with windows 95.
Epoch 2000® Sky Software is the most powerful astronomical software ever made available.
Epoch 2000sk. Now you can use the most advanced, most precise full-color sky software ever created, to zoom-in on telescopic fields smaller than one arc second! With star positions displayed as precisely as 0.01 arc second, the Trapezium in Orion is no longer shown as a single point, as in other software, but as four precisely oriented starpoints, just as they appear in the telescope. No longer do you need to guess R.A. and Dec. of the cursor position anywhere in the field and updates R.A. and Dec. instantaneously as the cursor is moved about the field.
Meade LX200 owners can use Epoch 2000sk for remote auto-centering of objects in the telescopic field to a precision of 30 arc seconds, routinely!
Print professional-quality star charts in either black-and-white or color, at any zoom setting or sky scale between 180º and one arc second, with your own customized borders, headers, footers, margins, fonts, colors and grids.
Rainbow-Line.jpg (1093 bytes)
Epoch 2000ip Image Processing Software makes it easy to enhance and analyze your CCD images with the same sophisticated techniques used by professional astronomers to uncover hidden structure in a spiral galaxy or obscure detail on the surface of a planet. This powerful software includes virtually every technique available for image enhancement. Techniques that bring out the detail totally invisible in your original image, transforming it from the ordinary to the spectacular.

 

Orders: 1-800-701-STAR or Order Online CreditCards.gif (2808 bytes)